Attachment Kits for U-Channel Posts
(58093)
Most signs are attached to a u-channel post. And, most use our simple and inexpensive kit (below). For greater security, however, we recommend our Tamper-Proof brackets. These can be installed easily with a normal screwdriver. But, you will need a special tool to remove them. Lastly, check out our post pounder or drive cap. These simple tools can really make a difference.
Tamper-Proof for a U-Channel Post – Pair of Brack...
BoltGuard Anti-Theft Post Attachment Kit – 2 Bolt...
2.5"x0.3125"
Heavy Steel Post Driver for Sign Posts - 22 Pounds
Post Attachment Kit - 2 Bolts for Heavy Duty Post...
Steel Post Drive Cap for U-Channel
Attachment Kits for Chain Link Fences
(82163)
Our Universal EZ-Clips take just one person to install a sign. Fits all sizes of chain link fences and all common sign hole sizes. Sold in pairs and they are our best seller. Our tall brackets (for 18” and 24” signs) shown below have been used for a generation of sign installers and remains a traditional favorite.
Chain Link Fence Attachment Kit – Pair of EZ-Clips
Fence Bracket for 18" high signs with 2 bolts & 2...
Fence Bracket for 24" high signs with 2 bolts & 2...
Attachment Kit for Ornamental Fencing
(58094)
We make it easy to install a sign on ornamental fencing – common at playgrounds, pools and dog parks. This innovative bracket fits most common ornamental fence types and make it easy to position and level your sign correctly.
Decorative Fence Attachment Kit – Pair of Brackets
Mounting Hardware for Round Posts, Telephone Poles
(100116)
Use our Round Post Brackets for standard and common round steel poles. For larger posts, pedestals and poles from 2” to 15” in diameter, use our Hose Clamp kit. If you want to “flag mount” your signs use our Wing Brackets. Wing Brackets can also be used on square or u-channel posts. Or use the Wing Brackets to perpendicularly mount a sign on a wall, such as in an alley.
Wing Bracket for Double Faced Signs
4" x 2" x 1.25" (h x w x d)
K-POST-WING-02
Round Post Brackets
2-3/8" diameter
K-TUBE-MOUNT
Steel Sign Hose Clamp
3" - 15" Diameter
K-Hose-Clamp
Heavy-Duty Flag Mount Bracket with Bolts & Screws
6" x 2.375" (h x w)
K-FLAG-BRACKET-02
Heavy-Duty No Drill Flag Mount Bracket with Hose Clamps
6" x 2.375" (h x w)
K-FLAG-BRACKET-01
Other Hardware
(100117)
Ratcheting Screwdriver for Tamper-Proof Security Bolt
K-Screwdriver
Wedge Anchor Bolt Attachment Kit for Brick or Concrete – 2 Bolts, 2 nuts, 2 washers
K-KIT-BC
Wheel hardware for Cast Iron Sign Stand
K-BASE-WHEEL
Other Sign Accessories
(100118)
Simple and Easy!
Absolutely easy to use!!